GODEX 2200 DRIVER

In the Self-Test Mode, the printer will print out a test sample each time when the Feed key is pressed. Maintenance And Adjustment Chapter 5. When printing, no ribbon is necessary; it only requires direct thermal media. Maintenance and Adjustment Label gap and black mark sensing. To print the manual completely, please, download it. After the paper jam is cleared, power on the printer, and the cutter blade will go back to its original position.

Uploader: Najar
Date Added: 4 February 2012
File Size: 41.82 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 94177
Price: Free* [*Free Regsitration Required]

To do this, just connect the keyboard to the printer, select the desired label from the list downloaded, specify number of the copies and start printing. Govex Interface Paralle Interface Handshake: Use a flat tip screwdriver as shown in the photoand turn the screws B clockwise to move the TPH In the Self-Test Mode, the gorex will print out a test sample each time when the Feed key is pressed.

Screw the Cutter Cover onto the cutter kit. Open the top cover. Pressure Adjustment Pressure Adjustment 1. Maintenance And Adjustment Chapter 5. Wrap the ribbon around the Ribbon Shaft Rod and stick the ribbon onto the empty ribbon roll.

  INTELLINET GIGABIT DRIVER

Barcode Printer Chapter 1.

Godex EZ-2200 Plus Label Printer

Self-test The Self-Test function in a printer will help the user godsx troubleshoot whether the printer is operating normally. Printer Parts Please use the following diagrams to identify each printer part.

The USB device is built on the serial port, therefore make sure the interface setting is specified to the assigned port. Comments to this Gidex Your Name. Use the flat tip screwdriver to loosen the TPH screws A on each side of the print head counterclockwise for one circle as indicated by the The strength and distribution of clamping pressure is adjusted by two stops.

Avoid pushing the guide too far in to damage the label edge. Take the power cable, plug the cable switch to the power socket, and then connect the other end of the cable to the printer power socket. Maintenance and Adjustment The Self-Test function in a printer will help the user to troubleshoot whether the printer is operating normally.

Print Width maxmm. After the paper jam is cleared, power on govex printer, and the cutter blade will go back to its original position.

The printer supports any Russian fonts loaded into internal memory with 2 MB capacity. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  ALTINA BLUETOOTH GPS DRIVER DOWNLOAD

Godex EZ-2200 User Manual

Power on the PC. Label gap and black mark sensing.

Install the media into the printer refer to 2- 1 for Ribbon Installation and for Label Installation. Open the Top Cover of the printer, and turn the printer sideways. Also See for EZ Programmer’s manual – 22 pages. Liner Rewind Sensor ogdex the printer will stop printing until liner 220 been removed from the printer.

When paper jams and cutter malfunctions, power off the printer. To stop the Self-Test procedure in the middle, simply power off the printer.

GODEX EZ USER MANUAL Pdf Download.

Table of Contents Add to my manuals Add. Face the printer front, and unscrew the Bottom Cover Screw. This manual also for: Place the printer onto a smooth surface, and open the top cover.